Project Description

TNG/FNG.0B push-pull self-latching connector, straight plug, key (G) or keys (A…M and R), cable collet and lanyard release

TNG/FNG.0B push-pull self-latching connector, straight plug, key (G) or keys (A…M and R), cable collet and lanyard release

1. TNG/FNG.0B push-pull self-latching connector brief introduction:

TNG.0B can intermateable with FNG.0B LEMO connector but cheaper. SPRING B Series Push-Pull Connectors are designed to offer a reliable connection for data, signal, and power transmissions in indoor and outdoor.

2. TNG/FNG.0B push-pull self-latching connector description:

  • solder, print contacts (straight or elbow)
  • multipole types 2-9 contacts
  • high packing density for space savings
  • multiple key options to avoid cross mating of similar connectors
  • keying system («G» key standard) for connector alignment
  • 360° screening for full EMC shielding.
  • security of the Push-Pull self-latching system

3. TNG/FNG.0B push-pull self-latching connector technical specification:

Pulling and inserting times>5000.
HumidityMaximum humidity up to 95% at a temperature of 60°
Temperature-45°~+125°
Vibration10~20000HZ,15g
Mechanical shock100g·6ms
Salt spray corrosion test>48h
Protection levelIP50
Connector typePlug, Male Pins
Number of positions2-9 pin
TerminationSolder
Fastening typePush-pull
OrientationG,(A…M&R)
Shell materialBrass
Shell finishChrome
Shell colorSilver
Contact materialBrass
Contact finish-matingGold
Contact colorGold
Insert materialpolyphenylene sulfite ( PPS)
Cable opening1.5mm~5.5mm

    Email us, We will answer your email shortly!

    SPRING P/NLEMO P/NDefinition
    TNG.0B.302.CLAD**ZFNG.0B.302.CLAD**ZTN Plug with key (G), Shell Size 0B, 2 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.5~5.5mm diameter cable and nut for fitting a bend relief.with lanyard release
    TNG.0B.303.CLAD**ZFNG.0B.303.CLAD**ZTN Plug with key (G), Shell Size 0B, 3 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.5~5.5mm diameter cable and nut for fitting a bend relief.with lanyard release
    TNG.0B.304.CLAD**ZFNG.0B.304.CLAD**ZTN Plug with key (G), Shell Size 0B, 4 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.5~5.5mm diameter cable and nut for fitting a bend relief.with lanyard release
    TNG.0B.305.CLAD**ZFNG.0B.305.CLAD**ZTN Plug with key (G), Shell Size 0B, 5 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.5~5.5mm diameter cable and nut for fitting a bend relief.with lanyard release
    TNG.0B.306.CLAD**ZFNG.0B.306.CLAD**ZTN Plug with key (G), Shell Size 0B, 6 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.5~5.5mm diameter cable and nut for fitting a bend relief.with lanyard release
    TNG.0B.307.CLAD**ZFNG.0B.307.CLAD**ZTN Plug with key (G), Shell Size 0B, 7 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.5~5.5mm diameter cable and nut for fitting a bend relief.with lanyard release
    TNG.0B.309.CLAD**ZFNG.0B.309.CLAD**ZTN Plug with key (G), Shell Size 0B, 9 Pin Contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.5~5.5mm diameter cable and nut for fitting a bend relief.with lanyard release

    Alignment Key

    B series connector model part numbers are composed of three letters. TNG–The LAST LETTER indicates the key position and the contact type (male or female),So you also can choose TNA, TNB, TNC…Cross Reference FNA, FNB, FNC…

    Alignment-Key-(B-series)

      Email us, We will answer your email shortly!

      If you have purchased Lemo connector and know the original model, please tell us. We will directly offer you our corresponding one.

      If you don’t know much about the connector, please make choose according the following factors:

      1 the use of the environment, indoors or outdoors, waterproof or not;

      2 the panel hole size, to select the appropriate plug and socket of right dimension;

      3 the current-voltage and the realization of the function, to determine the cores;

      4 select the appropriate clamp diameter and sheath;

      5 according to the actual needs of different angles of the keys, to determine the keying (the standard keys as G).

      You can also use the selection guide

        Email us, We will answer your email shortly!