Project Description

TGG/FGG.0K Straight plug, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief

TGG.0K Straight plug, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief

1. TGG/FGG.0K watertight push-pull connector brief introduction:

TGG.0K can substitute for FGG.0K LEMO connector but cheaper. Highly reliable and durable, High-performance push-pull connectors, High pin density helps minimize equipment size

2. TGG/FGG.0K watertight push-pull connector description:

  • security of the Push-Pull self-latching system
  • rugged housing for extreme working conditions.
  • multipole types 2 to 9 contacts
  • solder, print contacts (straight or elbow)
  • watertight connection (IP 68/IP 66)
  • high packing density for space savings
  • multiple key options to avoid cross mating of similar connectors
  • keying system («G» key standard) for connector alignment
  • 360° screening for full EMC shielding.

3. TGG/FGG.0K watertight push-pull connector technical specification:

Pulling and inserting times>5000.
HumidityMaximum humidity up to 95% at a temperature of 60°
Temperature-45°~+125°
Vibration10~20000HZ,15g
Mechanical shock100g·6ms
Salt spray corrosion test>48h
Protection index (mated)IP68/IP66
Connector typePlug, Male Pins
Number of positions2-9 pin
TerminationSolder
Fastening typePush-pull
OrientationG,(A to F, L and R)
Shell materialBrass
Shell finishChrome
Shell colorSilver
Contact materialBrass
Contact finish-matingGold
Contact colorGold
Insert materialpolyphenylene sulfite ( PPS)
Cable opening1.0mm~5.0mm

    Email us, We will answer your email shortly!

    SPRING P/NLEMO P/NDefinition
    TGG.0K.302.CLAD**ZFGG.0K.302.CLAD**ZTG Plug with key (G), Shell Size 0K, multipole type with 2 contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.0-5.0mm diameter cable and nut for fitting a bend relief.
    TGG.0K.303.CLAD**ZFGG.0K.303.CLAD**ZTG Plug with key (G), Shell Size 0K, multipole type with 3 contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.0-5.0mm diameter cable and nut for fitting a bend relief.
    TGG.0K.304.CLAD**ZFGG.0K.304.CLAD**ZTG Plug with key (G), Shell Size 0K, multipole type with 4 contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.0-5.0mm diameter cable and nut for fitting a bend relief.
    TGG.0K.305.CLAD**ZFGG.0K.305.CLAD**ZTG Plug with key (G), Shell Size 0K, multipole type with 5 contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.0-5.0mm diameter cable and nut for fitting a bend relief.
    TGG.0K.306.CLAD**ZFGG.0K.306.CLAD**ZTG Plug with key (G), Shell Size 0K, multipole type with 6 contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.0-5.0mm diameter cable and nut for fitting a bend relief.
    TGG.0K.307.CLAD**ZFGG.0K.307.CLAD**ZTG Plug with key (G), Shell Size 0K, multipole type with 7 contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.0-5.0mm diameter cable and nut for fitting a bend relief.
    TGG.0K.309.CLAD**ZFGG.0K.309.CLAD**ZTG Plug with key (G), Shell Size 0K, multipole type with 9 contacts, outer shell in chrome-plated brass, PPS insulator, male solder contacts, for 1.0-5.0mm diameter cable and nut for fitting a bend relief.

    Alignment Key

    K series connector model part numbers are composed of three letters. TGG–The LAST LETTER indicates the key position and the contact type (male or female),So you also can choose TGA, TGB, TGC…Cross Reference FGA, FGB, FGC…

    K-series-Alignment-Key

      Email us, We will answer your email shortly!

      If you have purchased Lemo connector and know the original model, please tell us. We will directly offer you our corresponding one.

      If you don’t know much about the connector, please make choose according the following factors:

      1 the use of the environment, indoors or outdoors, waterproof or not;

      2 the panel hole size, to select the appropriate plug and socket of right dimension;

      3 the current-voltage and the realization of the function, to determine the cores;

      4 select the appropriate clamp diameter and sheath;

      5 according to the actual needs of different angles of the keys, to determine the keying (the standard keys as G).

      You can also use the selection guide

        Email us, We will answer your email shortly!