Project Description

TAG/FAG.1B Fixed plug, non-latching, nut fixing, key(G ) or keys (A…M and R)

TAG.1B Fixed plug, non-latching, nut fixing

1. TAG/FAG.1B brief introduction:

TAG.1B can compatible with FAG.1B LEMO connector and connector of other companies of the same type making it but cheaper. SPRING B Series Push-Pull Connectors are designed to offer a reliable connection for data, signal, and power transmissions in indoor and outdoor

2. TAG/FAG.1B Lemo alternative connector description:

  • solder contacts
  • high packing density for space savings
  • security of the Push-Pull self-latching system
  • multipole types 2-16 contacts
  • multiple key options to avoid cross mating of similar connectors
  • keying system («G» key standard) for connector alignment
  • 360° screening for full EMC shielding.

3. TAG/FAG.1B Lemo alternative connector technical specification:

Pulling and inserting times>5000.
HumidityMaximum humidity up to 95% at a temperature of 60°
Temperature-45°~+125°
Vibration10~20000HZ,15g
Mechanical shock100g·6ms
Salt spray corrosion test>48h
Protection levelIP50
Connector typeplug, male pin
Number of positions2-16 pin
TerminationSolder
Fastening typePush-pull
OrientationG,(A…M&R)
Shell materialBrass
Shell finishChrome
Shell colorSilver
Contact materialBrass
Contact finish-matingGold
Contact colorGold
Insert materialpolyphenylene sulfite ( PPS)

    Email us, We will answer your email shortly!

    SPRING P/NLEMO P/NDefinition
    TAG.1B.302.CLAFAG.1B.302.CLATA Plug with key (G), Shell Size 1B, multipole type with 2 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.303.CLAFAG.1B.303.CLATA Plug with key (G), Shell Size 1B, multipole type with 3 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.304.CLAFAG.1B.304.CLATA Plug with key (G), Shell Size 1B, multipole type with 4 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.305.CLAFAG.1B.305.CLATA Plug with key (G), Shell Size 1B, multipole type with 5 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.306.CLAFAG.1B.306.CLATA Plug with key (G), Shell Size 1B, multipole type with 6 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.307.CLAFAG.1B.307.CLATA Plug with key (G), Shell Size 1B, multipole type with 7 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.308.CLAFAG.1B.308.CLATA Plug with key (G), Shell Size 1B, multipole type with 8 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.310.CLAFAG.1B.310.CLATA Plug with key (G), Shell Size 1B, multipole type with 10 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.314.CLAFAG.1B.314.CLATA Plug with key (G), Shell Size 1B, multipole type with 14 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.
    TAG.1B.316.CLAFAG.1B.316.CLATA Plug with key (G), Shell Size 1B, multipole type with 16 contacts,
    outer shell in chrome-plated brass, PPS insulator, male solder contacts.

    Alignment Key

    B series connector model part numbers are composed of three letters. TAG–The LAST LETTER indicates the key position and the contact type (male or female),So you also can choose TAA, TAB, TAC…Cross Reference FAA, FAB, FAC…

    Alignment-Key-(B-series)

      Email us, We will answer your email shortly!

      If you have purchased Lemo connector and know the original model, please tell us. We will directly offer you our corresponding one.

      If you don’t know much about the connector, please make choose according the following factors:

      1 the use of the environment, indoors or outdoors, waterproof or not;

      2 the panel hole size, to select the appropriate plug and socket of right dimension;

      3 the current-voltage and the realization of the function, to determine the cores;

      4 select the appropriate clamp diameter and sheath;

      5 according to the actual needs of different angles of the keys, to determine the keying (the standard keys as G).

      You can also use the selection guide

        Email us, We will answer your email shortly!